*euroboy* Skrevet Januar 12, 2009 Rapporter Share Skrevet Januar 12, 2009 Hei! Til alle dere med kloke hoder, og vag-com der ute: Er det mulig å justere "glødetiden" i vag-com? Slik at glødepluggene "gløder" som om det skulle vært 20 minusgrader hele året.. På forhånd, takk :) Siter 1998 Audi A4 1.9 TDi Avant Lenke til kommentar Del på andre sider More sharing options...
_eSOo_ Skrevet Januar 12, 2009 Rapporter Share Skrevet Januar 12, 2009 skulle tru dette var mulig :) spør på vacn er mange flinke der hvis du er medlem Siter - Audi coupe quattro typ85 - Audi A4 02 modell 1.8Tq Avant x Audi A4 96 modell 1.8Tq Avant Lenke til kommentar Del på andre sider More sharing options...
*euroboy* Skrevet Januar 12, 2009 Forfatter Rapporter Share Skrevet Januar 12, 2009 Det er jeg desverre ikke, så hvis det er glupinger som veit hvordan dette går til, er det bare å trykke det ut! Siter 1998 Audi A4 1.9 TDi Avant Lenke til kommentar Del på andre sider More sharing options...
al3x Skrevet Januar 12, 2009 Rapporter Share Skrevet Januar 12, 2009 Hva blir "glødetiden" på engelsk a? :P Siter - '01 Audi A4 1.8TQ - '95 Audi A4 1.6 - Bumblee Bee Lenke til kommentar Del på andre sider More sharing options...
volvo-r-sport Skrevet Januar 12, 2009 Rapporter Share Skrevet Januar 12, 2009 Glowtime??? Sikkert noe preheat eller noe sånt smart. Kan sjekke neste gang vi tar sjekk på bilen min, må bare fikse klima dritten først for å se hva som er igjen av feilkoder. Siter 92' 945 Turbo brukis 92' 240 Turbo prosjekt 82' Golf mk1 "GTI" 16V prosjekt 75' 242 (gjemt men ikke glemt) Lenke til kommentar Del på andre sider More sharing options...
al3x Skrevet Januar 12, 2009 Rapporter Share Skrevet Januar 12, 2009 Jeg fant jeg fant :) 1) Turn on ignition2) Go to engine controler 3) Log in using 12233 as the code 4) Click on Adaptation and go to group 12. 5) Change adaptation number from 32768 (default) to somewhere around 32700 6) Click test, then save the new value. 7) Close controler 8) Turn off ignition and turn back on again. 9) Go to the engine controler & log in again. 10) Go to adaptation block 12 and you should see a change in the second window. This value is the amount of time in seconds that the glow plugs will be active. Note, you must do this with a cold engine to be able to see the results of your adaptation. You can do the adaptation at any time, but won't notice anything till the engine temp is cold. Also, the new glow time will not appear in the second window (no units) after you do the adaptaion. You must turn the ignition off & on and re-log in to the engine controler to see the results of the adaptation. Link til guide: Her Siter - '01 Audi A4 1.8TQ - '95 Audi A4 1.6 - Bumblee Bee Lenke til kommentar Del på andre sider More sharing options...
*euroboy* Skrevet Januar 13, 2009 Forfatter Rapporter Share Skrevet Januar 13, 2009 Takk skal du ha! Du får sikkert lønn i himmelen, eller av nissen. Tror dere 12233 er en unik kode, eller passer den på min óg? Siter 1998 Audi A4 1.9 TDi Avant Lenke til kommentar Del på andre sider More sharing options...
Anbefalte innlegg
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.