Alpine V12 forsterkere og Type R 12" DVC subber selges!

[b0rre]

Har 2 pent brukte 1-2kanaler til salgs. Har også 2 pent brukte TypeR 12" subber i kasse til salgs.

 

1. Alpine V12 MRV-1507 - En meget kraftig forsterker!

2. Alpine V12 MRV-T407 - Kraftig litt mindre forsterker!

3. Alpine TypeR 12" subber

 

Dette selges til en fornuftig penge, kom med bud: )

Alt fungerer som det skal og subbene spiller utrolig bra med den største v12 forsterkeren.

 

Ta kontakt på PM,mail eller telefon:

stian.b0rresen@gmail.com

97010308

 

Forsterker 1: MRV-1507

24 dB / Octave LP / 12 dB / Octave HP Continuously Variable Crossover (30-200 Hz)

1-Band Parametric EQ (30-200 Hz)

Subsonic Filter (15 Hz)

Extra Large Gold Plated Terminals with Wire Insert Capability

Top Panel Power LED

4V Input Capability

1-year SonicElectronix.com warranty

 

Specifications:

Amplifier Type: 2-channel

RMS Power: 150W x 2 @ 12V

Bridged RMS Power: 600W x 1 @ 12V

THD at Rated RMS Power: 0.08%

Speaker Level Inputs: No

Preamp Outputs: Yes

Built-In Crossovers: HP/LP

Bass Boost: 12 dB

Frequency Response: 10-50,000 Hz

Channel Separation: n/a

Signal to Noise Ratio: 105 dB

Fuse Rating: 80A amps

 

Forsterker 2: MRV-T407

Specifications:

Dividing Network : 50Hz-200Hz HP/LP (12dB/oct)

Foot Print (WxHxD)in : 7-1/8O x 11O x 2-3/8O

Foot Print (WxHxD)mm : 180mm x 280mm x 60mm

Frequency Reponse : 10Hz - 50kHz (+0, - 1dB)

Heat Sink (WxHxD)in : 7-1/8O x 10-1/4O x 2-3/8O

Heat Sink (WxHxD)mm : 180mm x 260mm x 60mm

Input Impedance : 10k ohm

Input Sensitivity (for rated power) : 200mV ~ 4.0V

Power Requirements : 14.4V DC (11V to 16V)

Signal to Noise (S/N) : 100dBA (referenced to rated power)

Slew Factor : greater than 5

Speaker Impedance : 4 or 2 ohms(stereo), 4 ohms(bridged)

 

MAX Power (at 14.4V,EIAJ)

Bridged 4 ohms : 400W x 1

Per channel into 4 ohms : 140W x 2

 

RMS Power (at 12V,20Hz-20kHz)

Bridged 4 ohms : 150W x 1 (0.3% THD)

Per channel into 2 ohms : 75W x 2 (0.3% THD)

Per channel into 4 ohms : 40W x 2 (0.08% THD)

 

RMS Power (at 14.4V,20Hz-20kHz)

Bridged 4 ohms : 200W x 1 (0.3% THD)

Per channel into 2 ohms : 100W x 2 (0.3% THD)

Per channel into 4 ohms : 60W x 2 (0.08% THD)

 

Alpine TypeR 12" x2 (dual voice coil subber):

 

*Kevlar®-infused pulp cone

*1" Santoprene rubber surround

*dual 4-ohm, 2" voice coils

*frequency response 24-1,000 Hz

*power range 100-300 watts RMS (150 watts RMS per coil)

*peak power handling 1,000 watts

*sensitivity 87 dB

*top-mount depth 6-15/16"

*sealed box volume: 0.7-1.0 cubic feet

*ported box volume: 0.75-1.75 cubic feet

*Recommended Q-Logic Box Type: 1

[b0rre]

Alpine MRV-1507 SOLGT!